You are interested in testing an IGRP configuration. Host A (on the left) should be setup
with an IP address of 192.168.101.2 /24 and a default gateway of 192.168.101.1. Host B
(on the right) should be setup with an IP address of 192.168.100.2 /24 and a default
gateway of 192.168.100.1. The Ethernet interface of Router1 (on the left) should use an
IP address of 192.168.101.1 /24 and the Serial interface of Router1 should use an IP
address of 192.168.1.1 /24. The Ethernet interface of Router2 (on the right) should use
an IP address of 192.168.100.1 /24 and the Serial interface of Router2 should use an IP
address of 192.168.1.2 /24. You have a DCE cable connected to Router1. The serial link
should have speed of 64K. Configure the routers with IGRP (autonomous system 100) so
that all devices can ping any other device.
R1:
hostname router1
!
interface Ethernet0
ip address 192.168.101.1 255.255.255.0
no shut
!
interface Serial0
ip address 192.168.1.1 255.255.255.0
clock rate 64000
no shut
!
router igrp 100
network 192.168.1.0
network 192.168.101.0
R2:
hostname router2
!
interface Ethernet0
ip address 192.168.100.1 255.255.255.0
no shut
!
interface Serial0
ip address 192.168.1.2 255.255.255.0
no shut
!
router igrp 100
network 192.168.1.0
network 192.168.100.0
Host A:
Ipconfig /IP 192.168.101.2 255.255.255.0
Ipconfig /DG 192.168.101.1
Host B:
Ipconfig /IP 192.168.100.2 255.255.255.0
Ipconfig /DG 192.168.100.1