26. Can DHCP support remote access?
PPP has its own non-DHCP way in which communications servers can hand clients an IP address called IPCP (IP Control Protocol) but doesn’t have the same flexibility as DHCP or BOOTP in handing out other parameters. Such a communications server may support the use of DHCP to acquire the IP addresses it gives out. This is sometimes called doing DHCP by proxy for the client. I know that Windows NT’s remote access support does this.
A feature of DHCP under development (DHCPinform) is a method by which a DHCP server can supply parameters to a client that already has an IP number. With this, a PPP client could get its IP number using IPCP, then get the rest of its parameters using this feature of DHCP.
SLIP has no standard way in which a server can hand a client an IP address, but many communications servers support non-standard ways of doing this that can be utilized by scripts, etc. Thus, like communications servers supporting PPP, such communications servers could also support the use of DHCP to acquire the IP addressees to give out.
The DHCP protocol is capable of allocating an IP address to a device without an IEEE-style MAC address, such as a computer attached through SLIP or PPP, but to do so, it makes use of a feature which may or may not be supported by the DHCP server: the ability of the server to use something other than the MAC address to identify the client. Communications servers that acquire IP numbers for their clients via DHCP run into the same roadblock in that they have just one MAC address, but need to acquire more than one IP address. One way such a communications server can get around this problem is through the use of a set of unique pseudo-MAC addresses for the purposes of its communications with the DHCP server. Another way (used by Shiva) is to use a different “client ID type” for your hardware address. Client ID type 1 means you’re using MAC addresses. However, client ID type 0 means an ASCII string.