Configuration for IGRP:
- Router# conf terminal
- Router(config)# int e0
- Router(config_if)# ip add 192.168.10.10 255.255.255.0
- Router(config_if)# no shut
- Router(config_if)# exit
- Router(config)# int s0
- Router(config_if)# ip add 1.1.1.1 255.255.255.0
- Router(config_if)# no shut
- Router(config_if)# clock rate 6400
- Router(config_if)# router igrp 10 (10 represent the autonomous no which it prevent traffic from broad casting with each other)
- Router(config_router)# network 192.168.10.0
- Router(config_router)# network 1.0.0.0
- Router(config_router)# exit
Now do the configuration on router 2 as
- Router> enable
- Router# conf terminal
- Router(config)#int e0
- Router(config_if)# ip add 192.168.20.10 255.255.255.0
- Router(config_if)# no shut
- Router(config_if)# exit
- Router(config)# int s0
- Router(config_if)# ip add 1.1.1.2 255.255.255.0
- Router(config_if)# no shut
- Router(config_if)# clock rate 64000
- Router(config_if)# exit
- Router(config)# router igrp 10
- Router(config_router)# network 192.168.20.0
- Router(config_router)# network 1.0.0.0
- Router(config_router)# exit
- Router(config)# exit
- Router# exit
MORE:
- Default Routing
- Static Routing
- How to access a system on router 3
- RIP (routing information protocol) configuration
- IGRP (Interior Gateway Routing Protocol)
- EIGRP (Enhanced Interior Gateway Routing Protocol)
- OSPF (Open Shortest Path First)