Showing 10 of 16 Blog Posts
Network Address Translation is used translate the private IP into Public IP. It is do mapping. Types of NAT: Static NAT Dynamic NAT Overloading 1. Static Network...
Extended ACL is implemented on the bases of source, Destination and Application. The application are telnet, ICMP, HTTP, SMTP etc it also work on port no of...
Access control list is used for security on a Network from other Network. By this we restrict an IP or pool of IP to access a computer...
Router# conf terminal Router(config)# int e0 Router(config_if)# ip add 192.168.10.10 255.255.255.0 Router(config_if)# no shut Router(config_if)# exit Router(config)# int s0 Router(config_if)# ip add 1.1.1.1 255.255.255.0 Router(config_if)# no...
Configuration for EIGRP Router# conf terminal Router(config)# int e0 Router(config_if)# ip add 192.168.10.10 255.255.255.0 Router(config_if)# no shut Router(config_if)# exit Router(config)# int s0 Router(config_if)# ip add...
Configuration for IGRP: Router# conf terminal Router(config)# int e0 Router(config_if)# ip add 192.168.10.10 255.255.255.0 Router(config_if)# no shut Router(config_if)# exit Router(config)# int s0 Router(config_if)# ip add...
RIP (routing information protocol) configuration forRIP v1 and RIP v2 Router# conf terminal Router(config)# int e0 Router(config_if)# ip add 192.168.10.10 255.255.255.0 Router(config_if)# no shut Router(config_if)# exit...
When we want to access a system or network which is laying on router 3. so we will access it statically as Router# conf terminal...
In Static routing the network administrator hand type the path for routing. As Router>enable Router# conf terminal Roter(config)# int e0 Router(config_if)# ip add 192.168.10.10 255.255.255.0 Router(config_ig)#...
It is used to select the destination path automatically. Router > Router >enable Router(config)# conf t Router(config)# int e0 (or fa 0/0 it change with...
