🔔 If you experience any difficulties before or after finalizing your order, please reach out to us through email 📧 at support@ciscoforall.com

2950 IP Addresses Configuration

in CCNA Labs on June 19, 2014

You are building a Lab network to test switching configuration. Host A (on the left) should be setup with an IP address of 92.168.100.1 /24 and Host B (on the right) shouldbe setup with an IP address of 192.168.100.2 /24. Set the hostname on the switch on theleft to “switch1” and the hostname on the switch on the right to “switch2”. Set the IPaddress of switch1 to be 192.168.100.101 /24. Set the IP address of switch2 to be192.168.100.102 /24. Use the default VLAN for management.

IP Addresses
S1
hostname switch1
!
interface vlan 1
ip address 192.168.100.101 255.255.255.0
no shut
S2
hostname switch2
!
interface vlan 1
ip address 192.168.100.102 255.255.255.0
no shut
Host A:
Ipconfig /IP 192.168.100.1 255.255.255.0
Host B:
Ipconfig /IP 192.168.100.2 255.255.255.0

Back

Categories: CCNA Labs

Cart (0)

  • Your cart is empty.